GE IC200ALG260 8-channel 12-bit voltage/current analog input module

GE  IC200ALG260  8-channel 12-bit voltage/current analog input module

Functional characteristics
Signal processing: With eight isolated inputs, it can accept input signals from up to eight independent analog devices, and provide input data with 16-bit resolution for these devices, which can accurately convert analog signals to digital signals to meet the accuracy requirements of most industrial control scenarios.
Configurability: With additional software, per-channel selections for 4-20mA current or ±10V voltage inputs, optional input filters, and pre-channel selections for default and below/over range levels can be configured for different sensors and applications.
Diagnostic function: Provides eight words of analog input data, and reports underrange and overrange, open, power off, non-volatile memory faults, and high or low alarm diagnosis, while having two LED indicators, so that users can quickly understand the working status of the module and whether there are problems.

Electrical characteristic
Input signal type: Can be configured as voltage or current signal input, specifically support 4-20mA current input signal and -10Vdc /10Vdc voltage input signal.
Resolution: 12 bits, which means it can distinguish between 4,096 different voltage or current levels.
Response time: The signal response time is 5.0 ms, the update rate is 0.4 ms, and the filter response time is 5 ms, which can process and convert the input signal quickly and accurately.

Mechanical characteristic
Size: About 5.1 cm x 12.7 cm x 12.7 cm.
Weight: Approx. 0.3 kg.
Installation: Usually installed on the standard Versamax I/O backplane, through the backplane to obtain power, at 5 volts, the backplane maximum current consumption of 130 mA.