GE DS200EXDEG1AEA Servo I/O terminal board

GE DS200EXDEG1AEA Servo I/O terminal board

Features: Two servo outputs, I/O for six LVDT position sensors, and two active pulse rate inputs for flow monitoring.
Jumper Settings: The jumper is used to select the servo coil current between 10 and 120mA, and the servo valve coil resistance ranging from 22W to 1,000W can be selected via jumper JP1 and JP2. For example, the jumper 120B provides a coil current of about 120mA.
How to connect: Connect the DSVO to the VSVO processor board via a 37-pin cable, similar to the cable used on the larger TSVO board.
Installation method: Place the DSVO board into the plastic bracket and install it on the DIN rail. The Euro-Block type terminal block is installed on the terminal board and has 42 or 36 terminals (DSVOH1B, H2B) depending on the version.
Ground connections: High-density Euro-Block terminals are connected to the board using six screws for ground connections (SCOM), and six screws numbered 31 to 36 for SCOM (ground) connections should be used over the shortest possible distance.