ABB DO810 digital output module

ABB DO810 digital output module

Electrical parameter
Output channels: 16.
Output voltage range: 10-30V DC, signal specification is 24V DC (12-32V DC).
Maximum continuous output current: 0.5A.
Rated insulation voltage: 50V.
Dielectric test voltage: 500V AC.
Power consumption: Typical value 2.1W.
Current consumption: +5V module bus 80mA, +24V module bus 0mA.
Signal processing parameter
Signal type: current source type, current limiting type.
Isolation mode: Isolated from the ground in groups, divided into two separate isolated groups, each group has 8 output channels and 1 voltage monitoring input.
Output load: less than 0.4Ω.
Short-circuit protection: provides short-circuit, over-voltage and over-temperature protection.
Inductive load suppression: With inductive load suppression function.
Output status indicator: Each output channel has a status indicator LED.

Environmental parameter
Operating temperature: 0°C to + 55°C (+32°F to + 131°F), the approved operating temperature range is + 5°C to + 55°C.
Storage temperature: -40°C to + 70°C (-40°F to + 158°F).
Relative humidity: 5% to 95%, no condensation.
Electromagnetic compatibility: In line with EN 61000-6-4, EN 61000-6-2 and other standards.

Mechanical parameter
Dimensions: Width 45mm, depth 102mm (including connector 111mm), height 119mm.
Weight: 0.18kg.
Other features: HART, SOE, redundancy, high integrity, and intrinsically safe features are not supported. The module has a diagnostic function, and the front panel has LED indicators, which can indicate the fault, operation, warning, output status and the status of channels 1-16, can monitor the output status, and provide an alarm when the fault is detected, which helps to quickly troubleshoot and maintain.