Bently 3500/22-07-GCN transient Data interface module

Bently 3500/22-07-GCN transient Data interface module

The 3500/22-07-GCN is a transient data interface module in the 3500 Series monitoring system manufactured by Bently Nevada.

Functional Purpose: The module is the interface between the 3500 monitoring System and GE’s System 1 machine management software, which combines the capabilities of a 3500/20 rack interface module with the data collection capabilities of a communications processor such as TDXnet. It works in conjunction with M-series monitors (3500/40M, 3500/42M, etc.) to continuously collect steady-state and transient waveform data and transmit this data to the host software over an Ethernet link.

Technical parameters:
Power consumption: 10.5W.
Data interface: The front panel has 115.2 kbaud maximum RS232 serial communication interface; Support 10Base-T / 100Base-TX Ethernet, automatic sensing, also supports 100Base-FX fiber Ethernet.
Front panel indicator and relay: includes OK indicator to indicate whether 3500/22M is operating properly; TX/RX indicator to indicate communication status with other modules in the rack; TM indicator to indicate whether the 3500 frame is in tripping multiplication mode; Config OK indicator to indicate whether the 3500 rack has a valid configuration; The I/O module OK relay, which can be notified of abnormal status by the user by selecting the “normally open” or “normally closed” contact, the relay is usually in the “powered on” state, rated 5A@24VDC /120 VAC, 120 W / 600 volt ampoule switching power supply, and the normally closed contact is equipped with an arc interrupter.

Control function: The front panel has a rack reset button to clear lock alarms and timing OK channel faults in the rack, the same function as the “rack reset” contact on the I/O module; An address switch is provided to set the rack address, with 127 possible addresses; Features a configuration key lock for placing 3500 racks in either “Run” mode or “Programming” mode, in which the rack operates normally and locks configuration changes, in “Programming” mode, the rack operates normally and allows local or remote rack configuration, and the key can be removed from the rack at either location.

Dimensions Weight: The dimensions are approximately 9.50 “x 0.96” x 3.90 “and the weight is 0.82 kg (1.8 lb).