Honeywell CC-TAIX01 analog input module

Honeywell CC-TAIX01 analog input module

Electrical parameters
Working voltage: DC 24V.
Input range: -5V to + 5V or 0V to 10V and many other options are available, depending on the module configuration and application requirements. It can adapt to the output signals of different types of analog sensors.
Accuracy: Up to ±0.05%, ensuring the accuracy and reliability of the collected data, and providing high-precision input information for industrial control processes.
Power consumption: Approximately 0.5W. Under the low-power design, it can not only ensure the normal operation of the module but also effectively reduce energy consumption, making it suitable for long-term stable operation.
Current: 0.32A at 24V DC.
Heat dissipation: 2.464W.

Communication parameters
Communication protocol: Supports the Modbus RTU protocol, facilitating communication and data interaction with other devices or systems that follow this protocol, and achieving connection and control between the module and the upper computer, PLC or other industrial automation equipment.
Communication interface: It adopts RS485 interface, which has excellent anti-interference ability and a long transmission distance, and can stably transmit data in the complex electromagnetic environment of industrial sites.

Performance parameters
Sampling rate: 1kHz, capable of rapidly collecting analog signals, promptly capturing signal changes, and providing timely data support for real-time control and monitoring.
Response time: less than 1ms, ensuring that the module can respond promptly upon receiving changes in the input signal and transmit the data to the control system to achieve rapid regulation and control of the industrial process.

Working environment
Operating temperature: -20℃ to + 70℃.
Storage temperature: -40℃ to + 85℃.

In addition, each input channel is equipped with a 32-bit counter for pulse counting and frequency calculation. When these channels are configured as single input channels, these eight channels also have a second 32-bit timer for pulse period and pulse width measurement.