BENTLY 3500/54 286566-01 speed/phase monitor

BENTLY 3500/54 286566-01 speed/phase monitor

Functional characteristics
Speed measurement: It can accurately measure the speed of the rotating equipment and provide accurate speed data, which can be used to monitor whether the equipment is operating within the normal speed range, and track the speed change in real time.
Phase measurement: With the phase measurement function, you can determine the phase Angle of the rotating parts, which is very important for analyzing the operating state of the equipment and determining whether the equipment is unbalanced. Through the phase information, the operating characteristics of the equipment can be more comprehensively understood.
Multiple input types support: It can receive signals from different types of sensors, such as magnetoelectric sensors, photoelectric sensors, etc., to adapt to a variety of different measurement scenarios and device types. This compatibility enables the module to be widely used for monitoring a variety of industrial equipment.
Alarm and protection function: The alarm threshold of speed and phase can be set. When the measured value exceeds the set threshold, the module will send an alarm signal to remind the operator to pay attention to the possible problems of the equipment. In addition, it can also be linked with other devices or systems to achieve protection and control of the equipment, such as automatically taking measures such as stopping when speeding or abnormal phase, to prevent equipment damage or accidents.

Technical parameter
Measurement range: The speed measurement range is typically 0-30000 RPM (RPM) or higher, depending on the sensor and configuration used; The phase measurement range is generally 0-360 °.
Measurement accuracy: The speed measurement accuracy can reach ±0.1% or higher, and the phase measurement accuracy is usually about ±1°.
Input signal frequency: The acceptable input signal frequency range is wide, generally 0.1-20kHz, to meet the processing requirements of sensor signals at different speeds.
Output signals: Provide a variety of output signal types, such as analog output (such as 4-20mA current signals) for connecting to other display or control devices, digital output (such as switching signals) for alarm and interlock control, and may also have RS-485 or other communication interface output for data transmission and communication with the upper computer or other systems.

Application field
Power industry: Used to monitor the speed and phase of large rotating equipment such as generators and steam turbines, ensure the stable operation of the generator set, timely detect potential faults caused by abnormal speed or phase imbalance, and ensure the reliability of power supply.
Petrochemical industry: Applied in key equipment such as pumps and compressors, it is of great significance to determine the operating status of equipment by monitoring the speed and phase, and prevent production interruption and safety accidents caused by equipment failure, which is of great significance to ensure the continuity and safety of the chemical production process.
Metallurgical industry: Used for the monitoring of rolling mills, fans and other equipment, which helps to optimize equipment operating parameters, improve production efficiency, and prevent product quality degradation and equipment damage caused by equipment speed or phase problems.